Omron 3G3JV Manual page 6

Using Digital Operator
Selecting Indicators
Power ON
Frequency
reference
Parameter
settings
Parameter n01
Parameter n02
Other parameters
Note: If the power is turned OFF with the FOUT or IOUT indicator lit, the same indicator will light when the power is turned ON again.
In other cases, the FREF indicator will light when the power is turned ON.
Example of Frequency Reference Settings
Key sequence Indicator
Note: The Enter Key need not be pressed when performing the setting for n08. The frequency reference will change when the set
value is changed with the Increment or Decrement Key while the data display is continuously lit.
8
Output
Output current
frequency
Local/Remote
selection
Remote mode
Local mode
Flashing
Display example
Direction of
rotation
Forward
Reverse
Explanation
Power ON
Note If the FREF indicator has not been lit, press the Mode
Key repeatedly until the FREF indicator is lit.
Use the Increment or Decrement Key to set the frequency
reference.
The data display will flash while the frequency reference is
set. (see note 1)
Press the Enter Key so that the set value will be entered and
the data display will be lit. (see note 1)
represents a lit indicator.
Multi-function
monitor
Frequency reference
Output frequency
Other monitor items