Parkside PSBS 24 A1 CORDLESS HAMMER DRILL Operation And Safety Notes page 5

Introduction
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Design no-load speed
Volt (AC)
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Wear appropriate footwear.
For indoor use only!
Spindle lock
Drill chuck, Made In Germany
©
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. Further details can be found in the oper-
ating instructions. Keep these instructions in a safe
place. If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.
©
This device is intended for drilling and screwing into
wood, plastic and metal as well as for impact drilling
into stone, brick and concrete. When drilling into
6 GB/IE/CY
Watts (Effective power)
DC (current and voltage type)
Newton metre (torque)
Safety class II
Drill setting (torque preselect)
Drill setting (impact drilling)
Amp (Battery capacity)
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Keep children away from electrical
power tools!
Dispose packaging and appliance in
an environmentally-friendly way!
granite, we recommend the use of a drill hammer.
Use the device only as described and for the indi-
cated purposes. Any other use or modification to
the device shall be considered as improper use and
could give rise to considerable risk of accident. The
manufacturer will not accept liability for loss or
damage arising from improper use. Not suitable
for commercial use.
©
Gear selector switch
1
LED display / battery charge state
2
Battery charge state test button
3
Spirit level
4
Direction of rotation switch / lock
5
ON / OFF switch / Speed regulator
6
Bit
7
8 Battery unlocking button
9 Battery pack
10 Auxiliary handle
Quick-release chuck
11