Internal Temperature/Time Display; Standby Symbol; Internal Air Humidity Percentage/Minutes Display; Key Lock/Unlock Symbol - Smeg SDP20 Manual

8.4 Internal temperature/time display

During normal operation, this displays the Home Garden's internal temperature.
When first switched on, after a power shutdown or when the
time for setting. For instructions for setting the time, see "9.6 Clock display/setting key"
The Home Garden does not have a cooling function. It follows that the internal temperature will never
be lower than the external temperature.

8.5 Standby symbol

When this is the only symbol lit up on the control panel, the appliance is in standby.

8.6 Internal air humidity percentage/minutes display

During normal operation, this displays the Home Garden's internal relative humidity (in %).
When first switched on, after a power shutdown or when the
time for setting. For instructions for setting the time, see "9.6 Clock display/setting key".
The Home Garden does not have a dehumidifying function. It follows that the internal humidity will
never be lower than the external humidity.

8.7 Key lock/unlock symbol

When the remote control has not been used for ten minutes consecutively, the Home Garden locks its
current setting and commands are not accepted from the remote control. This is a precaution against
misuse, accidental or in play, by children, who may attempt to change the settings and thus affect the
growth of the plants.
For instructions for deactivating the lock, see "9.2 Standby key".

8.8 Internal light ON symbol

This symbol lights up whenever the
minute during day time, and an hour at night. It can be switched off manually at any time by pressing the
key when it is on. For instructions for the internal lighting function, see "9.5 Internal light key".

8.9 Cuttings function on symbol

This symbol indicates that the "Cuttings" function is activated.
If it is flashing, this means that the climatic conditions do not allow for activating the function.
For instructions for the "Cuttings" function, see "9.3 Cuttings function on key".

8.10 Remote control sensor

This sensor receives the signals emitted by the remote control whenever its keys are pressed and sends
them to the control circuitry, which activates the corresponding components. Ensure that it is never
blocked by any obstacles: they will block the signals from the remote control.
Control panel
key of the remote control is pressed, and stays on for around a
key is pressed, the display shows the
key is pressed, the display shows the
37