Smeg SC371X-8 Manual page 33

Instructions for the user
8.7.2 Setting the cleaning cycle
Turn the function selection knob to select one of the
two cleaning cycles out of and .
To start the cleaning cycle (Pyrolysis), press
followed by .
Press and hold ; press or to set the
duration of the cycle between a minimum of 1h 30m
and a maximum of 3h 00m (apart from the cycle
where the duration is set at 1h 30m).
Two minutes after the cleaning cycle (Pyrolysis)
starts, a locking device which prevents opening of
the door will be tripped. The relevant light will switch
on to indicate that the locking device has been
activated.
At the end of the cleaning cycle, the locking device
will remain active until the temperature inside the
oven has reached a safety threshold. When the oven
has cooled down, collect the residues from
automatic cleaning with a damp microfibre cloth.
To select a cleaning cycle with a delayed start,
after setting the duration press .
The time when the cleaning cycle will terminate will
appear on the display.
Press and hold , and press or to set
the time at which you wish to terminate the cleaning
cycle.
It is not possible to select any functions once the door locking device has been
activated. Wait for to go out.
79