Advertisement
Quick Links
Advertisement
Related Manuals for Smeg KE61X
Summary of Contents for Smeg KE61X
- Page 1 Libretto di Istruzioni Instructions Manual...
- Page 2 INDICE CONSIGLI E SUGGERIMENTI ...3 CARATTERISTICHE - INSTALLAZIONE...4 USO ...6 MANUTENZIONE ...7 INDEX RECOMMENDATIONS AND SUGGESTIONS ...9 CHARACTERISTICS - INSTALLATION...10 USE...12 MAINTENANCE...13...
- Page 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting from in- correct or improper installation.
- Page 4 CHARACTERISTICS - INSTALLATION FIXING OF THE HOOD UNDER THE CABINET • To drill the cabinet follow the indications given in the dimen- sional drawing in the chapter which regards hood dimensions. • To fix the hood onto the cabinet use the 44,4 mm long screws inserting and tightening them from the inside of the cabinet.
- Page 5 AIR OUTLET IN THE RECYCLING MODE • Open the metal grid and make sure that the conver- sion knob is in the recycling position. • Place the charcoal filter. The charcoal filter is not supplied together with the hood. (Hoods with two motors needs to be equipped with two charcoal fil- ters).
- Page 6 Lighting On/off lighting system. Motor On/off motor. Speed Speed control: 1. Minimum speed, particularly silent, continuous air exchange, suitable in pres- ence of only few cooking vapours and odours. 2. Medium speed, due to an optimum relation between hood extraction capacity and the noise level, it is suitable for most of the cooking conditions.
- Page 7 MAINTENANCE GREASE FILTER Regular maintenance and cleaning will ensure good performance and reliability, while extending the working life of the hood. Spe- cial attention should be taken to keep the grease filter clean at all times and the charcoal filter (recirculation model) should be re- placed regularly.
- Page 8 WORKTOP ILLUMINATION If a lamp fails to function at any time, open the metal grille panel and check that the lamp is fully screwed into the holder. When changing the lamp, an identical replacement must be fitted to ensure a safe working of the hood. CLEANING The metalwork should be cleaned regularly, at least once a month, using household cleaners and polish.