Instant Recording - Zenith VRB210 Operating Manual

P A G E 2 4 O P E R AT I O N

Instant Recording

Recording what you are watching on TV.
Options You Can Use While Recording
Instant recording lets you record until you reach the end of
tape or you press STOP to stop recording.
Turn TV and VCR on.
1
Place VCR in VCR mode by pressing the TV/VCR
2
button on the remote repeatedly until the VCR
indicator light appears in the VCR front panel.
Select channel 3 or 4 at the TV. If you have
3
connected your VCR to the TV's A/V input jacks,
select the A/V source at the TV for a better
picture.
Select the channel to be watched and recorded
4
at the VCR. If you have a cable box, select the
cable box output channel (usually 3 or 4) at the
VCR. Select cable box channels at the cable box.
Insert a VHS cassette tape into the VCR.
5
Press SP/EP to select recording speed, if
6
desired. Recording speed is always SP, unless
you select EP.
Press REC/ITR until recording begins. REC
7
indicator light appears in the VCR front panel.
Recording continues until you reach the end of
the tape, or until you press STOP to stop
recording.
power
sp/ep tv/vcr
Remote's Controls
sp/ep
power rec/itr
VCR's Controls
Instant Recording Instant Timer Recording
(until end of tape) (Preset recording times)
PAUSE – STOP or STOP/EJECT –
Momentarily pauses Stops and exits recording
recording. Press PAUSE mode.
again to resume recording.
STOP or STOP/EJECT –
Stops and exits recording
mode.
rec/itr
stop/eject