Contacta RF-TX1-865 User Manual

Specifications
4 GFSK
Emission modulation
Latency < 4 ms @ HQ
Mic capsule Condenser
Antenna Flexible antenna
RF output High : < 10 mW for 794~810,863~865,902~928 MHZ
: < 20 mW for 823~832 MHZ
Low : 2 ~ 6 mW
Mic. input 3-pole Mini XLR
3.5mm
Audio input
Battery (Provided 865Mhz) 2 x AA alkaline / rechargeable NiMH battery
Battery life > 8 hours (2,100 mAh rechargeable ba�ery)
Operation range > 50 meters
Dimensions (DxWxH) 88 x 64 x 29 mm/3.46 x 2.51 x 1.14 in (without antenna)
Weight (without battery) 113 ± 5 g/ 0.249lbs
Specifications are subject to change without prior notice.
Manufacturer's Declaration
This product meets the following standards:
Europe – EU Declaration of Conformity
This device complies with Directive 2014/53/EU issued by the Commission of the European
Federal Communications Commission Interference Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.
Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's
authority to operate the device.
WEEE Statement
Electrical and electronic equipment must be disposed of at the end of their
lifespan separately from household waste.
Please dispose of this equipment at your local waste collection or recycling
center. Please help to protect our environment.
Safety and Electromagnetic Emissions Certificates
Standard Compliance
RoHs compliant
European Directive 2011/65/EU
Certificates (country dependent)
CE NCC
C-TICK TELEC
FCC
RF-TX1 Box Contents:
RF-TX1 865MHz/915MHz, USB-M100, RF-TX1-LM, Lanyard, Belt Clip, 2100mAh NiMH
rechargeable batteries (865MHz version only)
Contacta Systems Ltd
Office 13, Dana Estate
Transfesa Road
Paddock Wood
TN12 6UT
(Tel) +44 (0) 1732 223900 (UK)
sales@contacta.co.uk
4
Version: 9180-017-B2-0124
Contacta Inc USA
4025 Tampa Rd,
Suite 1107A,
Oldsmar, Fl 34677
(Tel) +1 616 392 3400 (USA & Canada)
info@contactainc.com
Digital UHF Bodypack Transmitter RF-TX1-865/915 - User Manual
Illustra�on
1
2
6
3
C404
7
SET
4
5
RF-TX1-865/915
1 Flexible Antenna
2 Power / Talk LED indicator
Steady blue (red):
Sufficient (Low) ba�ery and talk mode is ac�vated.
Flashing blue (red):
Sufficient (Low) ba�ery but the transmi�er is muted ( ).
3 Set button
4 Backlit screen
5 Power button
Screen
Channel number
Custom ID
C404
Talk/Mute
Sound quality
General opera�on
Power on
Press and hold the power button for 1 second to turn the transmitter on.
Adjust channel manually
Channel lock is ac�vated
The screen will automatically be locked (
To unlock the transmi�er, press both and
Now, press the or button to select another preferred channel. Once the newly selected channel is
determined, press the set button again to confirm the selection and then symbol
Channel lock is de-ac�vated
Simply short press the or bu�on to select another preferred channel. The newly selected channel
will automa�cally be determined a�er the transmi�er is idle for 1 second.
Check channel frequency
Short press the set button to check the frequency of selected channel. The transmitter will return
back to the Home Screen after being idle for 2 seconds.
8
9
10
11
12
6 Up / Down bu�on
7 Charging port
(when NiMH battery applied)
Lanyard hole
8
Belt clip
9
3.5 mm audio-in jack
10
Talk / Mute switch
11
12 3-pole mini XLR microphone jack (for
use with RF-TX1-EM and RF-TX1-LM)
Channel lock
Battery status
RF power
Mic. gain
) when the transmi�er is on and idle for 5 seconds.
bu�ons for 1 second un�l symbol disappears.
will show up again.
1