Remote Controlling Zone 2 - Yamaha RX-V650 Owner's Manual

Using this unit's internal amplifier
To use this unit's internal amplifier, set "ZONE2 AMP" to ON in SET MENU (see page 59).

Remote controlling Zone 2

The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
To enable Zone 2 mode on the remote
control
1
Press .
CD MD/CD-R
DVD DTV/CBL
VCR 1 DVR/VCR2
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
R L
+
–
PRESENCE/ ZONE 2
This unit
TUNER SLEEP
V-AUX MULTI CH IN
AMP
TRANSMIT
ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
Second room
3
Enter the code number "2999".
Immediately after you have configured the remote
control for Zone 2, the remote will enter main mode.
When the remote is in main mode, you can turn the
main unit on, or set it in standby mode independently
of Zone 2 by pressing SYSTEM POWER or
STANDBY.
To control Zone 2
1
Press to set the remote control to Zone 2.
The TRANSMIT indicator on the remote control
lights up while the remote control is in Zone 2 mode.
2
Press SYSTEM POWER to turn Zone 2 power
on.
3
Press an input selector button to select the
input source you want to listen to in the
second room.
CD MD/CD-R
DVD DTV/CBL
VCR 1 DVR/VCR2
TUNER SLEEP
V-AUX MULTI CH IN
AMP
65