Yamaha RX-V2600 Owner's Manual page 89

5
Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all PEQ parameter settings for the
selected speaker, select RESET and press ENTER.
6
Select EXIT and press ENTER to exit the
settings window.
y
• If you select "Band" in step 3, you can use this menu as a
graphic equalizer.
• For more information on the parametric equalizer, see page 84.
■ Tone Control (Tone control)
Use to adjust the amount of bass and treble output to your
speakers and headphones.
Manual Setup > Sound > Tone Control >
Choices: Control, Bass, Treble, Audio Bypass
Note
Tone Control is not effective when:
– THX (see page 72) or PURE DIRECT (see page 71) is
selected.
– MULTI CH INPUT is selected.
Control (Tone control)
Choices: Speakers, Headphones
Control
Bass
Treble
• Select "Speakers" to adjust the bass/treble balance of
your speakers.
• Select "Headphones" to adjust the bass/treble balance
of your headphones.
Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: 125Hz, 350Hz, 500Hz (frequency)
–6.0dB to +6.0dB (gain), initial setting: 0.0dB
Control
Bass
Treble
Speakers
Headphones
Speaker
Freq : 350Hz
Gain : 0.0dB
+6
+0
-6
Treble (Treble control)
Use this feature to adjust high-frequencies output to your
speakers or headphones.
Choices: 2.5kHz, 3.5kHz, 8.0kHz (frequency)
–6.0dB to +6.0dB (gain), initial setting: 0.0dB
Control
Bass
Treble
Auto Bypass
Auto Bypass (Auto bypass)
Use to set this unit to automatically bypass any
adjustments made for Tone Control.
Choices: Auto, Off
Bass
Treble
Auto Bypass
• Select "Auto" to set this unit to automatically bypass
any Tone Control settings.
• Select "Off" to set this unit to reflect the Tone Control
settings.
■ Audio Option (Audio options)
Use to customize this unit's overall audio settings.
Manual Setup > Sound > Audio Option >
Choices: Muting Type, Audio Delay, Max Volume,
Initial Volume, PR/SB Select
Muting Type (Muting type)
Use to adjust how much the mute function reduces the
output volume.
Choices: Full, –20dB
Muting Type
Audio Delay
Max Volume
• Select "Full" to completely halt all output of sound.
• Select "–20dB" to reduce the current volume by 20 dB.
SYSTEM OPTIONS
Speaker
Freq : 3.5kHz
Gain : 0.0dB
+6
+0
-6
Auto
Off
Full
-20dB
85