Using Learn - Yamaha RX-V2600 Owner's Manual

8
Press LEARN again to exit from the setup
mode.
LEARN
9
Press one of the buttons shaded below to
see if you can control your component. If you
can, the remote control code is correct.
POWER
POWER POWER STANDBY
TV AV
A XM AUDIO SEL SLEEP
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
(U.S.A. model)
y
If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
Notes
• ERROR appears in the display window if you press a button not
indicated in the respective step, or when you press more than
one button simultaneously.
• The supplied remote control does not contain all possible codes
for commercially available audio and video components
(including YAMAHA components). If operation is not possible
with any of the remote control codes, program the new remote
control function using the Learn feature (see "Using LEARN")
or use the remote control supplied with the component.
• Function programmed using the learn feature take priority over
remote control code functions.
FREQ/RDS FREQ/RDS EON EON MODE PTY SEEK MODE PTY SEEK START START
REC
DISC SKIP
OFF ON MACRO LEARN CLEAR
RE–NAME

Using LEARN

You can program remote control codes from other remote
controls. Use the LEARN feature if you want to program
functions not included in the basic operations covered by
the remote control codes, or an appropriate remote control
code is not available. You can program any of the buttons
available in the component control area (see page 103).
The buttons can be programmed independently for each
component.
Note
This remote control transmits infrared rays. If the other remote
control also uses infrared rays, this remote control can learn most
of its functions. However, you may not be able to program some
special signals or extremely long transmissions. (Refer to the
operating instructions for the other remote control.)
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
2
Press an input selector button to select a
source component.
XM
A AUDIO SEL SLEEP
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
(U.S.A. model)
3
Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
(U.S.A. model)
5 to 10 cm (2 to 4 in)
REMOTE CONTROL FEATURES
107