Microphone - Yaesu FT-8900R Operating Manual

Quad band fm transceiver
Hide thumbs Also See for FT-8900R:
Table of Contents

Advertisement

The MH-42
is similar to the MH-48
B6JS
keypad and its illumination switch.
PTT Switch
Press this switch to transmit, and release it to receive.
[ ACC ] / [ P ] / [ P1 ] / [ P2 ] Buttons
[ ACC ] button: Press this button to switch the "Main"
band between the "Left" and "Right" displays on the
LCD screen. This is the best and easiest way to set
the "Main" band to the side you prefer.
Pressing and holding in this button for 1/2 second moves
operation to the next-highest frequency band on the "Main"
band.
[ P ] button: Press this button momentarily to switch the fre-
quency control for the "Main" band between the VFO and
Memory Systems.
When the "Main" band is set to the VFO mode, press and hold in this
button for 1/2 second to activate the Smart Search Feature.
When the "Main" band is set to the Memory mode, press and hold in
this button for 1/2 second to shift to the "Memory (offset) Tuning" feature.
[ P2 ] button: Pressing this button repeatedly allows selection of the CTCSS or DCS mode
on the "Main" band. The selections available are:
ENC
ENC.DEC (Tone Squelch)
[ P3 ] button: Press this button momentarily to select the transmitter power output level on
the "Main" band ("LOW," "MID2," "MID1," or "HIGH").
When the "Main" band is set to the Memory mode or Home Channel, press and hold in this
key for 1/2 second to switch the memory channel display between the "Frequency" format
and "Alpha-numeric Tag" format.
You can reprogram the [ ACC ] , [ P ] , [ P1 ] , and [ P2 ] buttons for other functions, if desired.
See page 51 for details.
LOCK Switch
This switch locks out the Microphone buttons (except for the keypad and PTT switch).
[ UP ] / [ DWN ] Button
Press (or hold in) either of these buttons to tune (or scan up or down) the operating
frequency or through the memory channels on the "Main" band. In many ways, these
buttons emulate the function of the (rotary) "Main" band DIAL knob.
Notice: If you replace the microphone from the MH-48
versa, perform Menu #23 (MIC). See page 63 for details.
FT-8900R Operating Manual
MH-42
B6JS
, but the MH-42
A6J
DCS
M
ICROPHONE
does not include a DTMF
B6JS
CONDENSER MIC
MH-42
ENC ......
OFF
to MH-42
A6J
B
or vice
B6JS
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents