Xerox WorkCentre 7232 System Administrator Manual page 102

6 UNIX TCP/IP
PTS/pts
PT1/pt1
POH/poh
PTP/ptp
PRC/prc
Specifying double-sided printing
The following parameters can be specified.
DUP/dup
TUMBLE/tumble
SIMP/simp
NOTE: If several parameters are specified in an lpr command, data may not print
correctly.
NOTE: The system default is used if no parameter is specified.
NOTE: If the print data specifies double-sided or single-sided printing, those
specifications take priority over any -C option.
Specifying paper size and double-sided printing
Select a paper size and a binding option. The following parameters can be specified:
A3D/a3d
A3T/a3t
A4D/a4d
A4T/a4t
92
Parameter
Parameter
Parameter
Xerox WorkCentre 7232/7242 System Administration Guide
Description
Selects plain paper.
Selects thick paper 1.
Selects transparency.
Selects tracing paper.
Selects recycled paper.
Description
Double-sided printing as follows:
Double-sided printing as follows:
Single-sided printing
Description
Double-sided printing on A3 (297 × 420 mm/11.7 × 16.5
inches) paper and long-edge binding
Double-sided printing on A3 (297 × 420 mm/11.7 × 16.5
inches) paper and short-edge binding
Double-sided printing on A4 (210 × 297 mm/8.3 × 11.7
inches) paper and long-edge binding
Double-sided printing on A4 (210 × 297 mm/8.3 × 11.7
inches) paper and short-edge binding
A B
A B
C D