Whirlpool GZ9736XSS Installation Instructions And Use And Care Manual page 10

30" (76.2 cm) and 36” (91.4 cm) wall-mount canopy range hood
Hide thumbs Also See for GZ9736XSS:
Table of Contents

Advertisement

Available languages

Available languages

3. Slide the lower decorative flue into the recessed area of the
range hood top.
A
B
A. Lower decorative flue
B. Recessed area
4. Slide the upper decorative flue down inside the lower
decorative flue.
On 8 ft (2.4 m) ceilings the air vents on the upper decorative
flue are concealed by installing the decorative flue with air
vents down.
A
C
B
A. Upper decorative flue
B. Lower decorative flue
C. Upper decorative flue vents concealed
On 9 ft (2.7 m) to 10 ft (3 m) ceilings, air vents on the upper
decorative flue will be exposed after installation.
C
A
B
A. Upper decorative flue
B. Lower decorative flue
C. Upper decorative flue vents exposed
5. Plug into a grounded 3 prong outlet.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
6. Raise the upper decorative flue until its holes align with the
holes in the flue mounting bracket.
7. Mount the decorative flue to the flue mounting bracket with
two 3.9 x 9.5 mm mounting screws.
A
B
A. Flue mounting bracket
B. 3.9 x 9.5 mm mounting screws
8. Install metal grease filters by inserting the back edge of filter
into the rear channel of the filter opening. Push handle toward
the rear and push the filter up. Push filter toward the front and
insert into the front channel.
A
A. Metal grease filters
Page 10

Advertisement

Table of Contents
loading

Table of Contents