Specifications - Crown Macro-Tech MA-3600VZ Operation Manual

6 Specifications

Minimum Guaranteed Power
(see page 18 for complete power specifications)
Power in watts per channel,1 kHz, 0.1% THD
Stereo mode with both channels driven
2 ohms per ch.
4 ohms per ch.
8 ohms per ch.
Bridge-Mono mode
4 ohms
8 ohms
Parallel-Mono mode
1 ohm
2 ohms
Performance (120V AC units in stereo mode with 8 ohm load)
Frequency Response
(at 1 watt, 20Hz - 20 kHz) see Figure 6.3
Phase Response
(at 1 watt, 10Hz - 20 kHz) see Figure 6.6
Signal to Noise Ratio below full bandwidth power
20 Hz to 20 kHz
A-weighted
Total Harmonic Distortion (THD)
at rated power, from 20 Hz to 1 kHz
at rated power, at 20 kHz
Intermodulation Distortion (IMD)
60 Hz and 7 kHz at 4:1,from 368 milliwatts to full rated output
Damping Factor
10 Hz to 400 Hz See Figure 6.4
Crosstalk
(below rated power, 20 Hz to 10 kHz)
Controlled Slew Rate
Input Impedance nominally balanced, nominally unbalanced
page 16
120VAC, 60 Hz Units 100VAC International
Units
1800W 1460W
1565W 1300W
1120W 980W
3505W 2835W
3140W 2625W
3555W 2820W
3190W 2585W
± 0.1 dB
±10°
>100 dB
>105 dB
< 0.05%
< 0.1%
< 0.05%
>1000
see Figure 6.7
> 30 volts/microsecond
20 k ohms, 10 k ohms
Macro-Tech MA-3600VZ Power Amplifier
120 VAC International 230VAC International
Units Units
1490W 1520W
1300W 1325W
985W 965W
2980W 2800W
2600W 2515W
2980W 2910W
2600W 2565W
Operation Manual