Setting Up The Wireless Access Point - Watchguard Firebox SOHO 6 Wireless User Manual

4 Type the IP address and subnet mask of the wireless network
in the applicable fields.
The default IP address is 192.168.112.1. The default subnet mask is
255.255.255.0.
5 Select the Enable DHCP Server on the Optional Network
checkbox.
Type the First address for DHCP server in the applicable field.
6
The default is 192.168.112.2.
For additional information about the Optional Network
Configuration page, see "Configuring the Optional Network for
Wireless Networking" on page 48.

Setting up the Wireless Access Point

1 From the navigation bar on the left side, select Network = >
Wireless Configuration.
The Wireless Network Configuration page appears.
2 From the Encryption drop-down list, select Disabled.
3 From the Authentication drop-down list, select Open System.
4 Record the number that appears in the SSID text box of the
Basic Settings for later use.
The SSID is the identification number of the wireless device. The SSID is
used to create the wireless connection. The default SSID is the 5-digit
serial number for your SOHO 6 Wireless.
5 Click Submit.
For additional information about configuring the wireless
network, see "Configuring the Wireless Network" on page 51.
User Guide
Setting up the Wireless Access Point
29