Configuring The Wireless Network - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 2: Installation
6 Attach the AC adapter to the SOHO 6 Wireless. Connect the AC
adapter to a power supply.
7 Restart your computer.
See "Factory Default Settings" on page 35 for the factory default
configuration options. See "External Network Configuration" on
page 41 and "Configuring the Trusted Network" on page 45 for
special configurations.

Configuring the Wireless Network

The SOHO 6 Wireless protects all of the computers that connect to
your network through the Ethernet ports and wireless connections
of the SOHO 6 Wireless. Because WatchGuard is concerned about
the security of your network, the wireless feature of the SOHO 6
Wireless is initially disabled. The wireless feature should not be
activated until you configure the security of the wireless
connections.
Now that the SOHO 6 Wireless is installed, you can configure the
optional wireless network.
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless.
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select Network = >
Optional (802.11b).
The Optional Network Configuration page appears.
3 Select the Enable Optional Network checkbox to activate the
wireless network.
28 WatchGuard Firebox SOHO 6 Wireless