Physically Connecting To The Soho 6 Wireless; Cabling The Soho 6 Wireless For One To Four Appliances - Watchguard Firebox SOHO 6 Wireless User Manual

6 Select the Obtain an IP address automatically and the Obtain
DNS server address automatically checkboxes.
7 Click OK to close the Internet Protocol (TCP/IP) Properties
dialog box.
8 Click OK again to close the network connection Properties
dialog box. Click Close to close the network connection dialog
box. Close the Control Panel window.

Physically Connecting to the SOHO 6 Wireless

The SOHO 6 Wireless protects all of the computers that connect to
your network through the Ethernet ports and wireless connections
of the SOHO 6 Wireless. This section shows how to connect
computers to the SOHO 6 Wireless through Ethernet cables.
The SOHO 6 Wireless protects one computer or a multi-computer
network. The SOHO 6 Wireless also functions as a hub to connect
other computers.
Even if you only want to set up a wireless network, you must
connect a computer to the SOHO 6 Wireless through an Ethernet
cable. The computer that is connected through an Ethernet cable is
used to configure the wireless network. See "Configuring the
Wireless Network" on page 51 for additional information.
Cabling the SOHO 6 Wireless for one to four
appliances
A maximum of four computers, printers, scanners, or other
network peripherals can connect directly to the SOHO 6 Wireless.
These connections use the four numbered Ethernet ports (labeled
User Guide
Physically Connecting to the SOHO 6 Wireless
23