Watchguard Firebox SOHO 6 Wireless User Manual page 193

What is a SOHO 6 Wireless feature key?
See "Activating the SOHO 6 Wireless Upgrade Options" on
page 70.
I can't get a certain SOHO 6 Wireless feature to work with
a DSL modem.
Some DSL routers implement NAT firewalls. An external network
connection through an appliance that supplies NAT causes
problems with WebBlocker and the performance of IPSec. When a
SOHO 6 Wireless connects to the external network through a DSL
router, set the DSL router to operate as a bridge only.
How do I install and configure the SOHO 6 Wireless using a
Macintosh (or other) operating system?
The installation instructions for the Macintosh and other operating
systems are available from the WatchGuard Web site:
https://www.watchguard.com/support/sohoresources/soinstallhelp.asp
How do I know whether the cables are connected correctly
to my SOHO 6 Wireless?
The front panel of the SOHO 6 Wireless has fourteen indicators.
The WAN indicator shows if the SOHO 6 is connected to the
modem; if this indicator is not lit, the SOHO 6 is not connected.
• Make sure that the cable is connected from the SOHO 6
Wireless to the modem.
• Make sure the Internet connection is active.
The link indicators (0-3) are for the four Ethernet ports of the
trusted network. These indicators show whether the SOHO 6
Wireless is wired to a computer or hub. If the indicators are not lit,
the SOHO 6 Wireless is not wired to the computer or hub. Make
User Guide
Troubleshooting tips
167