Watchguard Firebox SOHO 6 Wireless User Manual page 192

Chapter 11: Support Resources
computer attached to one of the four Ethernet ports (labeled 0-
3) to configure the SOHO 6 Wireless.
If the Mode light is blinks:
The SOHO 6 Wireless cannot connect to the external network.
Possible causes of this problem include:
• The SOHO 6 Wireless did not receive an IP address for the
external interface from the DHCP server.
• The WAN port is not connected to another appliance.
• The connection to the external interface is defective.
• The appliance to which the external interface of the SOHO 6
Wireless is connected is not operating correctly.
How do I register my SOHO 6 Wireless with the
LiveSecurity Service?
See "Registering your SOHO 6 Wireless and Activating the
LiveSecurity Service" on page 37.
How do I restart my SOHO 6 Wireless?
See "Rebooting the SOHO 6 Wireless" on page 38.
How do I reset my System Security password, if I forgot or
lost it?
See "Factory Default Settings" on page 35.
How does the seat limitation on the SOHO 6 Wireless
work?
See "Cabling the SOHO 6 Wireless for more than four appliances"
on page 26.
166 WatchGuard Firebox SOHO 6 Wireless