Watchguard Firebox SOHO 6 Wireless User Manual page 156

Chapter 10: MUVPN Clients
If there is no modem installed, you can select the Don't detect my modem;
I will select it from a list checkbox. Select the standard 28800 modem.
To install RAS, Windows NT requires at least one RAS device, such as a
modem, to be installed. If a modem is not available, a serial cable
between two computers can be selected.
8 Select the modem added in the previous step from the Add
RAS Device window.
9 Click OK, click Continue and then click Close.
10 Reboot the computer.
Configuring the WINS and DNS settings
The remote computer must be able to communicate with the WINS
servers and the DNS servers. These servers are located on the
trusted network that is protected by the SOHO 6 Wireless.
From the Windows desktop:
1 Select Start => Settings = > Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Click the Protocols tab and then select the TCP/IP protocol.
4 Click Properties.
The Microsoft TCP/IP Properties window appears.
5 Click the DNS tab and then click Add.
6 Enter the IP address of your DNS server in the applicable field.
To add additional DNS servers, repeat steps 5 and 6.
130
N
OTE
WatchGuard Firebox SOHO 6 Wireless