Updating The Firmware - Watchguard Firebox SOHO 6 User Manual

Updating the Firmware

Check regularly for SOHO 6 firmware updates on the WatchGuard
Web site:
http://www.watchguard.com/support/sohoresources/
Download the files that contain the firmware update. Save the files
on your computer.
Follow these instructions to transfer the new firmware to your
SOHO 6:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Administration = > Update.
The Update page opens.
If you configure your SOHO 6 from a computer that does not use the
Windows operating system, such as Macintosh or Linux, you must update
your firmware with this procedure. The WatchGuard installation
programs supplied on CD-ROM are compatible only with Windows
platforms.
3 Read the end-user license agreement. Then select the I accept
the above license agreement checkbox at the bottom of the
page.
User Guide
N
OTE
Updating the Firmware
55