Windows 98/Me Operating System Setup - Watchguard Firebox SOHO 6 User Manual

You cannot use the MUVPN virtual adapter. Make sure this is disabled.

Windows 98/ME operating system setup

This section describes how to install and configure the network
components that are required for the Windows 98/ME operating
system. These components must be installed before the MUVPN
client will function correctly on a Windows 98/ME computer.
The Mobile User VPN Adapter supports L2TP .
Configuring network names
From the Windows desktop:
1 Select Start => Settings = > Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Make sure the Client for Microsoft Networks is installed.
The Client for Microsoft Networks must be installed before you continue
with this procedure. For instructions, see "Installing the Client for
Microsoft Networks" on page 110.
4 Click the Identification tab.
5 Type a name for the remote computer in the applicable field.
This name must be unique on the remote network.
6 Type the domain name for this connection in the applicable
field.
7 Enter a description for the remote computer in the applicable
field.
This step is optional.
User Guide
Preparing the Remote Computers to Use the MUVPN Client
N
N
OTE
OTE
109