1. Manuals
  2. Brands
  3. VTech Manuals
  4. Cordless Telephone
  5. GZ2434 - VMix Cordless Phone
  6. Operating instructions manual

VTech gz 2434 Operating Instructions Manual

Vtech gz2434: operating instruction
Hide thumbs Also See for gz 2434:
Table of Contents

Advertisement

Quick Links

Download this manual

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
protect it from overheating, these openings must not be blocked by placing the product
on the bed, sofa, rug, or other similar surface. This product should never be placed near
or over a radiator or heat register. This product should not be placed in a built-in
installation where proper ventilation is not provided.
7. This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your
dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
9. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on the product.
10.To reduce the risk of electric shock, do not disassemble this product, but take it to a
VTech authorized service facility. Opening or removing cabinet parts other than specified
access doors may expose you to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when the appliance is subsequently used.
11.Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
12.Unplug this product from the wall outlet and refer servicing to a VTech authorized
service facility under the following conditions:
A.When the power supply cord or plug is damaged or frayed.
B.If liquid has been spilled into the product.
C.If the product has been exposed to rain or water.
D.If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions, because improper
adjustment of other controls may result in damage and will often require extensive
work by a VTech authorized technician to restore the product to normal operation.
E. If the product has been dropped and the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
1

Advertisement

Table of Contents
loading

Related Manuals for VTech gz 2434

Summary of Contents for VTech gz 2434

  • Page 1: Important Safety Instructions

    11.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 12.Unplug this product from the wall outlet and refer servicing to a VTech authorized service facility under the following conditions: A.When the power supply cord or plug is damaged or frayed.
  • Page 2 Important Safety Instructions SAVE THESE INSTRUCTIONS STOP If you have questions about this product, or if you’re having difficulty with setup or operation, do not return your phone to the store. Call CUSTOMER SERVICE at: 1-800-595-9511 In Canada, call 1-800-267-7377...

  • Page 3: Before You Begin

    1. Base Unit 3. AC Power Adapter 5. Battery Pack 7. User’s Manual To purchase replacement battery packs, call VTech Communications, Inc at 1-800-595- 9511. In Canada, call VTech Telecommunications Ltd at 1-800-267-7377. Before You Begin 2. Handset 4. Telephone Line Cord 6.

  • Page 4: Setup

    Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. Plug the AC power adaptor into the...

  • Page 5: Check For Dial Tone

    PHONE. You should hear a dial tone. Tone/Pulse Selection Your gz 2434 is preset for tone dialing. See “Telephone Operation” for details. CAUTION: Use only the VTech power supply provided with your telephone. IMPORTANT: FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM: 1.

  • Page 6: Handset Features

    Handset Features Volume Keys · While on a call, press to raise or to lower the volume. A double beep will sound then you reach maximum minimum level. PHONE/FLASH · Press PHONE/FLASH then dial the number to make a call. ·...

  • Page 7: Base Features

    MESSAGE LED U S E / C H A R G I N G · Indicator Illuminates when a caller · leaves a message in F l a s h e s w h e n t h e your voice mailbox, see H a n d s e t i s i n u s e .

  • Page 8: Telephone Operation

    Press SELECT to save the displayed mode. Message Waiting Your gz 2434 is designed to work with most local and regional telephone service provider is Voice Messaging systems, providing alerts on both the Handset and Base Unit when new messages come in.

  • Page 9: Temporary Tone Dialing

    After calling your voicemail service and listening to all new messages, the indicators will be turned off within a few seconds after you complete your call. You can retrieve your voicemail messages from any telephone. If the indicators remain on after all new messages have been reviewed, you can turn them off manually: Make sure the Handset is off.

  • Page 10: Telephone Directory

    Telephone Directory This cordless phone can store 50 telephone numbers with names, each up to 24 digits long. Entries are stored alphabetically. For consistency with Caller ID entries, you may wish to enter last names first. Note: Press OFF at any time to exit directory.

  • Page 11: Edit A Number/Name Stored In The Directory

    Press the dial pad key for the first letter of the entry you want to edit. 3 When the screen displays the number you want to edit, press SELECT . Then press until flashes. Telephone Directory to choose the desired Melody. Then (for Yes) if you wish the phone to change the setting, then...

  • Page 12: Delete A Number/Name Stored In The Directory

    Telephone Directory 4 Press SELECT. The screen displays the name and number. The flashing cursor appears at the end of the name. Use Press SELECT to move on to edit the number. Press SELECT to move to edit the Distinctive Ring setting and Animation setting. Follow steps 7-11 in “Store a Number/ Name in the Directory”.

  • Page 13: Caller Id Operation

    For each call that comes in, the screen displays the following information between the first and second rings: • Your caller’s name (15 letters are sent by your telephone company). • The caller’s area code and telephone number. • The time and date of the call.

  • Page 14: Dial A Displayed Number

    Caller ID Operation 3 Press until flashes, then press SELECT. The screen displays 4 Press until flashes. 5 Press SELECT. You will hear a long beep confirming the deletion. Dial a Displayed Number 1. Locate the record in call history you want to dial in memory. 2.

  • Page 15: Ringer Options

    In addition to 4 traditional ringer options and ringer OFF, your gz 2434 Handset has 6 popular pre-programmed melodies, plus the option for you to compose up to 7 melodies, using the COMPOSER feature. Traditional Ring Options Pre-programmed Melodies: “All the Small Things” (Blink182) Words and Music by Tom DeLonge and Mark Hoppus ©...
  • Page 16 Ringer Options You can adjust the characteristics of the ‘note’ you’ve just selected by entering the following digits: Shortens the duration of the note (or rest). Lengthens the note. Inserts a rest (pause) of the same duration of the previous note. Sets the octave for new notes.

  • Page 17: Headset Operation

    Headset option, you must obtain an optional accessory Headset, which is compatible with the gz 2434. To purchase a Headset, call VTech Customer Service at 1-800-595-9511. Once you have a compatible 2.5mm Headset, locate the Headset Jack on the gz 2434 Handset.

  • Page 18: In Case Of Difficulty

    If the phone doesn’t work at all, check these items first: • Make sure the AC adapter is plugged into an outlet not controlled by a wall switch. • Make sure the telephone line cord is plugged firmly into the base unit and the modular jack.
  • Page 19 • Press CHAN to change to another channel. • Disconnect the Base from the modular jack and plug in a corded telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone service company.

  • Page 20: Maintenance

    Avoid water Your telephone can be damaged if it gets wet. Do not use the Handset outdoors in the rain, or handle it with wet hands. Do not install your Base Unit near a sink, bathtub or shower.

  • Page 21: Warranty Statement

    3. Product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech electrical accessories; or 5. Product whose warranty/quality stickers, Product serial numbers plates or electronic serial numbers have been removed, altered or rendered illegible;...
  • Page 22 • If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.

  • Page 23: Fcc, Acta And Ic Regulations

    This equipment is compatible with inductively coupled hearing aids. Should you experience trouble with this telephone equipment, please contact: VTech Communications, Inc. CUSTOMER SERVICE at 1-800-595-9511. In Canada, call VTech Telecommunications at 1-800-267-7377. For repair/warranty information. The telephone company may ask you to disconnect this equipment from the line network until the problem has been corrected.
  • Page 24 The REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. In most, but not all areas, the sum of all RENs should be five (5.0) or less. You may want to contact your local telephone company for more information.
  • Page 25 FCC, ACTA and IC Regulations a. We recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn’t work. b. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature.

  • Page 26: The Rbrc Seal

    RBRC program or at authorized VTech product service centers. Please call 1-800-8- BATTERY TM for information on Ni-Cd battery recycling and disposal bans/ restrictions in your area.
  • Page 27 A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc.; Beaverton, Oregon. Distributed in Canada by VTech Telecommunications Canada Ltd., Suite 200, 7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2003 for VTECH TELECOMMUNICATIONS LTD.

  • Page 28: Table Of Contents

    Tone/Pulse Selection ... 5 Removable Face Plate and Base Plate ... 5 Handset Features ... 6 Base Features ... 7 Telephone Operation ... 8 Handset Ringer Style/Battery Save ... 8 Set Date and Time ... 8 Set the Dial Mode ... 8 Message Waiting ...

Table of Contents