Advertisement
Quick Links
T
he LM-SM shock-mount accessory
isolates a Crown LM-Series micro-
phone from mechanical noise
when mounted in a lectern, pulpit, or
table top. The rubber isolator is highly
stable and prevents theft by securely
holding the mic in place. Installation is
quick and easy.
The LM-301A requires an LM-301SMA
shock mount adapter to work with the
LM-SM shock mount.
Installation
1. To flush-mount the shock mount in the
lectern, make a center mark for a 2
(6.985 cm) diameter hole.This will provide
adequate clearance for the shock mount.
7
2. At the center mark, drill a 1
/
8
cm) diameter hole to accept the LM-SM
shock mount.
3. Using the four screws provided, screw the
LM-SM shock mount to the lectern.
4. Adjust the microphone for the desired
height and tighten the set screw in the
LM-SM shock mount.
ACCESSORY SHOCK MOUNT ADAPTER FOR LM-SERIES GOOSENECK MICROPHONE
Fig. 1
1.105 in.
(2.81 cm)
2.210 in.
(5.61 cm)
3
/
inch
4
.164 in.
(0.42cm)
inch (4.763
1.274 in.
(3.24 cm)
LM-SM
2.210 in.
(5.61 cm)
1.105 in.
(2.81 cm)
.770 in.
(1.96 cm)
2.703 in. Dia
(6.87 cm)
.910 in.
(2.31 cm)
1.033 in.
(2.62cm)
Fig. 2
LM-Series
Microphone
Wood Screws (4)
LM-SM
Shock Mount
Locking Set Screw
XLR-Type Female
Cable Connector
1
-in. (4.763-cm) dia. Hole
in Mounting Surface
102005-3
5/02
Advertisement
