Table of Contents
Advertisement
2. Battery Installation
MX-1000 uses four AA batteries. Please be sure to match the
batteries with the (+) and (-) markings inside the battery compartment
during installation.
The remote control goes through self-testing for three seconds after
the batteries are installed and automatically moves to setting mode for
your programming.
NOTE: Please do not mix old batteries with new ones or mix different
types of batteries.
3. Summary of Operations
A. Description of Devices:
The MX-1000 is designed to operate up to twelve components. They
are Audio, CATV, Satellite, TV, DVD, VCR1, VCR2, Laser Disc,
Tuner, CD, Tape and AUX. However, the device button name can
be changed to meet your exact needs. You can also create a favorite
device page and transfer the frequently used devices to the favorite
device page in order to change the device button sizes and shapes.
Once you create the favorite device page, it will appear as a default
device page. Please refer to COPY in EDITING Section on page 21
for details.
There are also four pages of the LCD screen for each device and you
can use them to create, delete or edit any functional buttons to
customize with your audio/video components. Please refer to
EDITING on page 20 for details.
B. Pre-programmed Codes:
The MX-1000 comes with preprogrammed codes for practically all
the major audio and video equipment that are on the market. You can
operate all of your components with the MX-1000 simply by
punching in the three-digit code number that is assigned to your
brand. The code numbers for various brands and components are
listed in the instruction manual. Please refer to the programming
instruction shown on page 9 for details.
C. Learning:
The MX-1000 can also learn practically all the codes from your
original remote controls. There are 50 LCD screens in the remote
control and all the functional buttons in the LCD can be taught. In
addition, there are eleven rubber buttons and a joystick that contains
five functions. Each of these buttons and the joystick functions can be
taught in each of the twelve devices. As a whole, you can teach up to
780 new functions into the remote control. Please refer to page 12 in
the instruction manual for details.
Page 3, 4
Advertisement
Table of Contents
