Related Manuals for Universal Remote Complete Control MX-450
Summary of Contents for Universal Remote Complete Control MX-450
-
Page 1: Operating Your System
Operating Your System With the MX-450 ™ COMPLETE COMPLETE CONTROL Universal Remote Control ®... - Page 2 TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
-
Page 3: Table Of Contents
Introduction Backlighting Optional RF “No Rules” Operation Replacing the Batteries Programming the MX-450 Selecting a New “Activity” Using the MX-450 to Control an “Activity” USA Limited Warranty Statement Specifications Contact Us ABLE ONTENTS... -
Page 4: Introduction
A dedicated LIGHT button enables the user to backlight the buttons at any time. User settings, accessible by pressing and holding the MAIN button for 3 seconds, enable you to adjust how long the MX-450 stays lit (5 to 60 seconds). -
Page 5: Optional Rf "No Rules" Operation
Optional RF “No Rules” Operation In combination with a Complete Control RF Base Station, the MX-450 can control your system without being in line-of-sight of the equipment. To preserve good operation always utilize a Universal Remote Control brand RF Base Station with RF Addressing. RF Addressing gives you the ability to control equipment locations throughout your home, even if they are concealed in other rooms or are behind closed doors. -
Page 6: Replacing The Batteries
We highly recommend that you use a professional audio/video installer to program your MX-450 so you will be able to enjoy all the benefits of the MX-450. - Page 7 RF Setup enables you to address each device to a particular RF base sta- tion and even a particular IR output. You can set the MX-450 to output only IR for testing, or only RF for operation (highly recommended to avoid oversaturating IR sensors on devices).
-
Page 8: Selecting A New "Activity
Selecting a New “Activity” The MX-450’s MAIN button displays the activities you can control with your MX-450. When you want to watch something else (a DVD movie, a videotape or an HDTV broadcast), simply press the MAIN button and select the new activity. -
Page 9: Using The Mx-450 To Control An "Activity
Using the MX-450 to Control an “Activity” Once you’ve selected a new activity, the MX-450 displays the title of the activity at the top of the screen. Below the title, the LCD displays the cus- tomized names of any special features you need for the activity. All the hard buttons of the MX-450 have now changed to functions optimized for this activity. -
Page 10: Usa Limited Warranty Statement
TROL, INC. warrants this product against defects in material or workmanship for s period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. -
Page 11: Specifications
Note: In actual use, the MX-450 protects itself if it gets stuck between couch cushions (with a button being continuously pressed). After 30 sec- onds the MX-450 will turn off, and will not turn on again until the button is released. - Page 12 ™ COMPLETE COMPLETE CONTROL Universal Remote Control ® 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com...