Chapter 4. Push Button Scanning; Configuring The Push Buttons - UMAX Technologies AstraNET e5420 Owner's Manual

Numeric Buttons – Lets you specify the number of copies by clicking on the desired number. The number
appears to the left.
Scaling – Sets the printout size of your scanned image; the default is 100%.
Copy/Stop – Copy your scanned image by clicking the Copy button. When copying begins the button text
changes to read Stop. To stop printing copies, click the Stop button.

CHAPTER 4. PUSH BUTTON SCANNING

The defining feature of the AstraNET e5420/5470 is its push button functionality. You can scan an image
to e-mail, perform OCR (optical character recognition), or even use the scanner as a copy machine by
pushing one of the three buttons on the front panel of the scanner.
You can increase your productivity by accessing all of the normal scanner functions without having to
launch the software applications through the onscreen interface.
Before you can use these time-saving functions, you need to configure the settings for each button. Follow
the appropriate set of instructions below to configure the variables for each button.

Configuring the Push Buttons

To access the configuration utility for the push buttons, follow the appropriate instructions below:
For PC Users:
1. Click the scanner icon in the Task bar using your right mouse button. A pop0-up menu appears which
contains:
•
VistaScan
•
VistaShuttle
•
Copy Utility
•
Scanner Test
•
Push Button Configuration
•
Lamp On/Off Control
•
Find/Refresh Scanner
•
Exit
2. Click the Push Button Configuration option.
For Macintosh Users:
1. Click on the Finder in the upper right corner of the Desktop. A drop-down menu appears which
contains:
•
Hide VistaAccess
•
Hide Others
•
Show All
•
Finder
•
VistaAccess
2. Click on the Push Button Configuration option.
35