Use Of The Remote Control - Philips 26PF5321D User Manual

Use of the remote control

Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically
after 6 seconds or press
OK
POWER
Press to turn on/off the TV from or to
standby mode.
The TV is never powered off completely unless it is
physically unplugged.
Demo menu on/off
DEMO
See p. 8.
on/off
CLOCK
Time display (for max. 10 minutes)
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
MY CONTENT
Press to display the My Content menu on or
off, see p. 7.
OK
- to activate a setting
- to display the list of channels stored
(according to the selection made in the
Installation mode (Antenna or Cable), p. 8.
- starts playing content in the Home
Multimedia Browser application, p. 22.
MENU
Settings menu on/off, see p. 7.
Exit menu from sub-menu.
Volume
VOL
Press + or - to adjust the volume.
MUTE
Interrupt the sound or restore it.
+
AV
Press this button repeatedly to select the
source - , , ,
AV1 AV2 AV3
when in TV mode, according to where you
connected the accessory devices (p. 20).
To be continued.
English_DFU_35244_2aug.indd 5
to remove immediately.
, or
TV
HDMI SIDE
rc 4345 use rc 1 -tv g.eps
Note : Although this remote control can be used
for some other Philips products, it is not an
universal remote control.
DVD/R CBL TV VCR AUX
Press the
one of the system modes in which the remote
control can be used to operate that Philips
device.
If no action is undertaken within 60 seconds,
the remote control returns to TV mode.
After an action in the selected system mode
the remote control will remain in this mode
for 60 seconds and will then return to TV
mode.
Cursor buttons
Press the cursor buttons up/down, left/right to
navigate through the menus.
CH/PAGE
- To browse through the TV channels or
sources stored in the preferred channel list
(see p. 19).
- To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 7.
Note: You don't have to start the installation
again once you have searched for and stored
the available TV channels.
A/CH
Press to alternate between the currently
viewed channel and the previously view
.
channel
-
Press the dash (-) for digital channels.
INFO
Display information
available) information about the selected TV
channel and program or accessory device.
CC
Press to display the transmitted closed
captions text on the screen.
5
button repeatedly to select
SELECT
Channel selection
ed
: Press to display (when
2006-08-03 3:00:50 PM