Fluke BC190/803 Instruction Sheet

Fluke Corporation Fluke Industrial BV
PO Box 9090 PO Box 680
Everett 7600 AR Almelo
WA 98206-9090 The Netherlands
USA
LIMITED WARRANTY & LIMITATION OF
LIABILITY
Each Fluke product is warranted to be free from
defects in material and workmanship under normal
use and service. The warranty period is one year and
begins on the date of shipment. Parts, product repairs
and services are warranted for 90 days. This warranty
extends only to the original buyer or end-user
customer of a Fluke authorized reseller, and does not
apply to fuses, disposable batteries or to any product
which, in Fluke's opinion, has been misused, altered,
neglected or damaged by accident or abnormal
conditions of operation or handling. Fluke warrants
that software will operate substantially in accordance
with its functional specifications for 90 days and that it
has been properly recorded on non-defective media.
Fluke does not warrant that software will be error free
or operate without interruption.
Fluke authorized resellers shall extend this warranty on
new and unused products to end-user customers only
but have no authority to extend a greater or different
warranty on behalf of Fluke. Warranty support is
available if product is purchased through a Fluke
authorized sales outlet or Buyer has paid the applicable
international price. Fluke reserves the right to invoice
Buyer for importation costs of repair/replacement parts
when product purchased in one country is submitted for
repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to
refund of the purchase price, free of charge repair, or
replacement of a defective product which is returned to a
Fluke authorized service center within the warranty
period.
To obtain warranty service, contact your nearest Fluke
authorized service center or send the product, with a
description of the difficulty, postage and insurance
prepaid (FOB Destination), to the nearest Fluke
authorized service center. Fluke assumes no risk for
damage in transit. Following warranty repair, the product
will be returned to Buyer, transportation prepaid (FOB
Destination). If Fluke determines that the failure was
caused by misuse, alteration, accident or abnormal
condition of operation or handling, Fluke will provide an
estimate of repair costs and obtain authorization before
commencing the work. Following repair, the product will
be returned to the Buyer transportation prepaid and the
Buyer will be billed for the repair and return
transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT
BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, INCLUDING LOSS OF DATA, WHETHER
ARISING FROM BREACH OF WARRANTY OR
BASED ON CONTRACT, TORT, RELIANCE OR ANY
OTHER THEORY.
Since some countries or states do not allow limitation of
the term of an implied warranty, or exclusion or limitation
of incidental or consequential damages, the limitations
and exclusions of this warranty may not apply to every
buyer. If any provision of this Warranty is held invalid or
unenforceable by a court of competent jurisdiction, such
holding will not affect the validity or enforceability of any
other provision.
BC190
Battery Charger /
Power Adapter
Instruction Sheet
Specifications
l
Versions:
BC190/801 European line plug
230 V ±10%.
BC190/803 North American line plug
120 V ±10%.
BC190/804 United Kingdom line plug
230 V ±10%.
BC190/806 Japanese line plug
100 V ±10%.
BC190/807 Australian line plug
230 V ±10%.
BC190/808 Universal switchable
adapter 115 V ±10% or 230V ±10%,
with plug EN60320-2.2G
l
Line frequency: 50 and 60 Hz
l
Output voltage: 17.8 V
l
Output current: 840 mA.
l
Output plug: 5-mm power jack per
DIN 45232.
l
Plus (+) voltage connected to outer
contact of the 5-mm power jack.
l
Operating temperature: 0 to +40 °C
(32 °F to 104 °F).
Safety
l
EN60742, UL1310
600 V Category III, Pollution Degree 2,
protection class II (double insulation), per:
l
EN61010-1
l
UL3111
l
CAN/CSA-C22.2 No. 1010.1
May 1999
© 1999 Fluke Corporation. All rights reserved.
Printed in The Netherlands.
All product names are trademarks of their respective
companies.
®