Operation - Craftsman 113.177135 Owner's Manual

2 gallon wet/dry vac
Hide thumbs Also See for 113.177135:
Table of Contents

Advertisement

Operation
WARNING
To reduce the risk of fire or explosion,
do not operate this vac in areas with
flammable
gases, vapors or explosive
dust in the air. Flammable
gases or
vapors include but are not limited to: lighter fluid, solvent type cleaners, oil-
base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to: coal, magnesium,
grain or gun powder. Do not vacuum
explosive dust, flammable or combustible liquids or hot ashes. Do not use this
vac as a sprayer for any flammable
or combustible
liquid. To reduce the risk
of health hazards from vapors or dusts, do not vacuum toxic materials.
CAUTION:
To reduce
the
risk of
hearing damage, wear ear protectors
when
using
the vac
for extended
hours or when
using it in a noisy
area.
The operation
of any utility vac can
result in foreign objects being blown
into the eyes, which
can result in
severe
eye damage.
Always
wear
safety goggles complying with ANSI
Z87.1
(shown
on package)
before
commencing
operation.
Safety
goggles are available at Sear retail
stores.
Your Craftsman two-gallon
wet/dry vac is
assembled at the factory and ready for use
when you remove it from the carton. The
unit is ready for dry vacuuming or blowing.
After you plug the power cord into the wall
receptacle, turn the unit "ON" by pushing
the switch from position
"0"
to position
"1". The symbols used on the switch are
international
symbols.
The "0"
is the
"OFF" position
and the "1" is the "ON"
position.
O=
OFF
I = ON

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

17713 - clean n carry 2 gal. wet-dry vac

Table of Contents