Insignia NS-24F202NA22 Quick Setup Manual

QUICK SETUP GUIDE
24"/32"/42"
1080p LED TV
NS-24F202NA22 / NS-32F202NA22 /
NS-42F201NA22
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
+ + +
TV stands
24"
32"
Self tapping screws
(4 x 12 mm length)
42"
(4 pcs.)
STOP
Before using your new TV, read these
instructions to prevent any damage.
Do not plug the power cord in until all
other devices have been connected.
INSTALLING THE STANDS OR A WALL MOUNT
1
Place your TV face-down on a cushioned, clean surface.
STANDS
24"
1 Align the TV stand screw
holes with the holes on
your TV's bottom.
2 Use a Phillips screwdriver
and two of the provided
screws to secure each
stand to your TV.
4 × 12 mm screws
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
2 MAKING CONNECTIONS
HDMI
(best video quality)
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
AV
(good video quality)
AUDIO/VIDEO OUT
VIDEO
Coaxial
(good video quality)
HD HD
Connect an antenna to
access live over-the-air TV.
32"
42"
32" TV: 4 × 12 mm screws
4 × 12 mm screws
42" TV: 4 × 12 mm screws
42" TV shown
32" VESA Mounting Pattern
100 × 100 mm
Screws: type M4, 10 mm to
12 mm length depending
on the wall mount
VESA Mounting Pattern
42"
VESA Mounting Pattern
24"
200 × 100 mm
100 × 100 mm
Screws: type M6, 10 mm to
Screws: type M4, 10 mm to
12 mm length depending on
12 mm length depending
the wall mount
on the wall mount
/AUDIO OUT
DIGITAL
OPTICAL
OUTPUT
HDMI3 HDMI2 HDMI1
(ARC)
HDMI OPTIONS
VIDEO L R
AUDIO
AV IN
ANT/CABLE
ETHERNET
FEATURES
42" TV shown
Power indicator
Remote control
sensor
32" TV: 4 × 12 mm screws
42" TV: 4 × 12 mm screws
42" TV shown
Note: Images do not necessarily represent the exact design
of your television.
ANALOG
L
R
AUDIO IN
SOUNDBAR
You can use the DIGITAL OPTICAL
DIGITAL
OUTPUT jack or the HDMI1 (ARC)
jack.
Note: If you need to change the
digital audio format, go to the Home
OPTICAL
AUDIO IN
menu, select Settings, then select
Display & Sounds. Select Audio
SOUNDBAR
Output, then select Digital Audio
Format and change the setting to
PCM.
ETHERNET (optional)
Note: You can use a wired Ethernet connection to
access the internet, instead of a WiFi connection.
ETHERNET
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
Power/
Input button
Press to turn
your TV on or
off manually.
When your TV
is on, a short
press changes
inputs, a long
press turns
off your TV.
A
AUDIO
OPTIONS