Dhcp; Dhcp Settings - TP-Link TL-MR3420 User Manual

3g/3.75g wireless n router
Table of Contents

Advertisement

MAC Address - The connected wireless station's MAC address
Current Status - The connected wireless station's running status, one of
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected
Received Packets - Packets received by the station
Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.
Note:
This page will be refreshed automatically every 5 seconds.
4.7

DHCP

Figure 4-31 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-31 ): DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.

4.7.1 DHCP Settings

Choose menu "DHCP→DHCP Settings", you can configure the DHCP Server on the page
(shown in Figure 4-32 ).The Router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the Router on the LAN.
Figure 4-30 The Router attached wireless stations
TL-MR3420
3G/3.75G Wireless N Router
-56-
STA-AUTH /

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents