Wan - TP-Link TL-MR3420 User Manual

4.5.3 WAN

Choose menu "Network→WAN", you can configure the IP parameters of the WAN on the screen
below.
Note:
WAN settings are unavailable when the Internet Access mode is set to 3G Only mode. Please
change settings on 4.5.1 Internet Access
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
4-12):
Figure 4-11 Add or Modify a 3G USB Modem Entry
if you want to use WAN.
TL-MR3420 3G/3.75G Wireless N Router
-33-