Ti-34 Ü Basic Operations - Texas Instruments TI-34 II Explorer Plus User Manual

TI.34 Ü Basic Operations
Keys
These numbered paragraphs provide
explanations for the corresponding numbered
keys on the illustration below.
1. & turns on the calculator.
2. % turns on the 2nd indicator and
accesses the function shown above the
next key you press.
3. % ' turns off the calculator and
clears the display.
4. < completes the operation or
executes the command.
5. % i recalls the most recently
calculated result and displays it as
Ans.
6. ! and " move the cursor left and right
to scroll the entry line. Press % ! or
% " to scroll to the beginning or end
of the entry line.
2
3
1
7
© 1999 T I
EXAS NSTRUMENTS
6
4
5
I
NCORPORATED
Press # and $ to move the cursor up
and down through previous entries.
Press % # or % $ to scroll to the
beginning or end of the history.
7. %  displays the
Reset: N Y
Press < when
to return to the previous screen
without resetting the calculator.
Press < when Y (yes) is
underlined to reset the calculator.
The message MEM CLEARED is
displayed.
Pressing & and - simultaneously
also resets the calculator immediately.
No menu or message is displayed.
Notes
The examples on the transparency
masters assume all default settings.
Resetting the calculator:
Returns settings to their defaults:
floating decimal (standard) notation
and degree mode.
Clears memory variables, pending
operations, entries in history,
statistical data, constants and
(Last Answer) Ans.
The entry line can contain up to 88
characters. When ¸ or ¹ appear in the
display, the entry line contains
additional characters to the left or
right. When º or » appear, additional
characters are above and below the
entry line.
Press & after Automatic Power
Downé (APDé). The display, pending
operations, settings, and memory will be
retained.
TIN34 Û: A Guide for Teachers
1
menu:
RESET
(no) is underlined
N
37