Advertisement
EQ Setup and User EQ
After entering the music option, click on "
" Normal/3D/Rock/Pop/Classic/bass/Jazz/User EQ". Or you can edit your favorite EQ mode in the "User EQ set"
option.
Play mode
You can choose "Order" or "Shuffle" in the "play mode" folder
Order: Choose "Order" mode to play songs in sequence
Shuffle: Choose "Shuffle" to play songs randomly
2. Record
Double click "Record" option and select "REC Quality" or "REC Volume"
REC Quality: high quality, normal quality
REC Volume: five options of volume level "+1, +2, +3, +4 and +5"
*The recorded voice file will be saved in "Music"
*If the player "Full Space", it indicates that there is no space to save new file
3. Display Setup
①Backlight time: six options of 5 sec., 10 sec., 15 sec., 20 sec., 30 sec., and always on.
②Lum: five options of +1, +2, +3, +4 and +5, the higher level, the brighter.
③Backlight mode: Normal and Power save modes.
4. Auto play set
There are text and jpeg under this file: 1s, 2s, 3s, 4s, 5s.
5. System Setup
Four sub-options: Language, about, Upgrade and Default set.
①Languages: Simplified Chinese, Traditional Chinese, English, Korean, Japanese, and French
②About: Player information
③Touch Screen Calibration
Click the three "+" shown on screen consecutively to complete the touch screen calibration. You can press the
"power" to quit the calibration at anytime. It is recommended to set the touch screen calibration everytime when
you operate your player.
.
6. Power Off Time
There are six options of Power: Off, 10 min., 15 min., 30 min., 60 min. and 120 min.
7. Defaulted set
Click "yes" to format the player or click "no" to return to the main menu
*The recorded voice file will be saved in "Music"
*If the player "Full Space", it indicates that there is no space to save new file
Ⅶ
Firmware Update
The player can be upgraded or reset by the software program stored inside the installation CD.
1.
Insert the installation CD. Open the file \Firmware Upgrade tool\ConsumerUpdate 3.1.2.0\setup.exe
2.
Install and run the program.
Click "Open" and select the firmware file (.rfw)
3.
4.
Click Update to start the firmware upgrade process
" and press "EQ Select" to choose the EQ mode
7
Advertisement
