Samsung WB700 User Manual page 89

Viewing files on a TV or HDTV
Viewing files on an HDTV
You can view high-quality and uncompressed photos or videos
on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs. For details,
see the HDMI Kit manual.
1
In Shooting or Playback mode, press [m].
2
Select n
HDMI Size.
3
Select an HDMI resolution. (p. 101)
4
Turn off your camera and HDTV.
5
Connect your camera to your HDTV using the optional
HDMI cable.
6
Turn on your camera.
•
If you have an Anynet+ compatible Samsung HDTV, and you
have turned the Anynet+ function on in your camera, the
HDTV turns on automatically and displays the camera screen,
and the camera automatically enters Playback mode.
•
If you turn Anynet+ off in your camera, the HDTV does not turn
on automatically.
•
If you don't have Anynet+ on your TV or Anynet+ is turned off
in your camera, turn on your TV, and then select the HDMI
source on your TV using your TV's remote control.
7
View files using the buttons on your camera or a remote
control of your HDTV.
•
If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in
the camera's settings menu (p. 101) to control the camera and TV with
the TV's remote control.
•
Anynet+ lets you control all connected Samsung A/V devices with the
TV remote control.
•
The time it takes for the camera to connect to your HDTV may vary
with the type of SD or SDHC card you use. A faster SD or SDHC card
will not necessarily result in a faster HDMI transfer, because the main
function of the card is to improve transfer rate during shooting.
88
Playback/Editing