Table of Contents
Advertisement
OMPLTV26M_27M_32M.book Page 14 Monday, October 10, 2005 11:44 AM
Configuring the Display
The On-Screen Display (OSD) allows you to configure the operation of the LCD. You can change
video and audio settings, activate and configure Picture-in-Picture (PIP) and closed captioning,
select television channels, control access to mature programming, and configure other general
display behavior.
To use the OSD:
1. Press the MENU button on the remote or the top of the display.
2. Once the OSD appears, use the
at the top of the OSD.
3. Press the ENTER button to enter the selected menu.
4. Use the
and
5. Press the ENTER button to select the desired item.
6. If no text is displayed next to the item name, a sub-menu will appear upon pressing ENTER.
Repeat steps 4 and 5 to navigate the sub-menu.
7. If the selected item is an adjustable parameter, one of two things will happen:
A pop-up box will appear, in which case use
ENTER to accept the value.
The parameter will edit in place, in which case use
ENTER to accept. Then press
mark will show next to the currently selected value.
8. Press
to exit a menu.
9. Press MENU to exit the OSD.
Note: The currently selected source determines which menus are available in the OSD. The
following table lists the menus available for each source:
Source
TV
AV1
AV2
AV3
S-Video
YPbPr1
YPbPr2
VGA
DVI
and
buttons to navigate the menus represented by icons
buttons to navigate the menu items.
to return to the menu. While editing the parameter, a check
Video
Audio
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
14
and
to adjust the parameter and then press
and
to adjust the value and then press
Menu
Misc.
TV
•
•
•
•
•
•
•
•
•
•
PC
•
•
Hide quick links:
Advertisement
Table of Contents
