Sony Ericsson P900 User Manual page 126

Sony ericsson cell phone user's guide
Hide thumbs Also See for P900:
Table of Contents

Advertisement

This is the Internet version of the user's guide. © Print only for private use.
you will be given a warning about the problem but you can still
decide to proceed with installation at your own risk. In general it
is recommended that you install only from SIS files where the
vendor identity and file integrity can be verified.
Note Installation of uncertified applications may cause your
system to crash and all your data will then be lost.
MIDP applications run in a protected environment with no
access to sensitive information so no signatures are required for
MIDP JAR files.
From a PC
must be installed in your PC and the P900 must
PC Suite for P900
be connected to the PC via SyncStation, infrared, or Bluetooth
wireless technology in order to install applications from your
PC.
Installing applications from your PC
1. Connect your P900 to the PC via SyncStation, infrared or
Bluetooth wireless technology. When connected, an icon is
shown in the status area to the right in the taskbar on the PC.
2. Start the PC software
Install Software
application (.sis file) to install.
3. Confirm to install the application in the P900.
4. Select target drive (phone memory or Memory Stick Duo).
Download to the P900 begins.
5. Installation starts when the download is complete.
126
and select the
From the P900
Program packages, for example, games, can also be downloaded
to your P900 from the Internet or from a Memory Stick Duo.
When downloading a file from the Internet, the installation will
start automatically when the file is completely downloaded to
your P900. The procedure below describes installation of
application packages already in the P900 but not yet installed.
See 'To download and upload files, for example, applications'
on page 76 for information about how to download files from
the Internet.
Installing applications in the P900
1. Select
.
2. From the menu, select
Applications > Install
3. Select the software from the list.
4. Select
If the software is certified, an information
Install.
dialogue will be shown with the name of the software,
version and supplier. Select
5. Now, depending on the software, you may be prompted to
replace a previous installation, select language, memory
location and select other installation options.
6. Installation is complete. Select
.
again.
Install
.
Done
Installing applications

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents