Download Print this page

Field Controls SWH-1 Quick Start Manual

Sidewall vent hood

Advertisement

Quick Links

SIDEWALL VENT HOOD
Model: SWH-1 - 4"-8"
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of
a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
Please retain these instructions after installation.
Installed By:
Phone:
Installation Date:
www.fi eldcontrols.com

Advertisement

loading

Summary of Contents for Field Controls SWH-1

  • Page 1 SIDEWALL VENT HOOD Model: SWH-1 - 4"-8" READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION. This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions required, and has complied with all the requirements of the authority having jurisdiction.
  • Page 2 This device should be installed in accordance with the National Fuel Gas Code ANSI Z223.1 (See Requirements Below) and any local codes which are applicable. All individual or multiple appliance vents must enter the vent system on the inlet side of the venter. 1.
  • Page 3 INSTALLATION SAFETY INSTRUCTIONS CAUTION: This device must be installed by a qualifi ed installer in accordance with the manufacturer's installation instructions and applicable codes. 1. Plan the vent system layout to avoid the possibility of accidental contact with concealed wiring or plumbing inside of wall.
  • Page 4 WARRANTY For warranty about this or any Field Controls product, visit: www.fi eldcontrols.com/warranty Phone: 252.522.3031 • Fax: 252.522.0214 www.fieldcontrols.com © Field Controls, LLC P/N 46096300 Rev C 04/15...

This manual is also suitable for:

Swh-446092800 46092800