3” AND 6.5” RAM 310294J Low Level Shutoff Kit 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure Part No. 918478, Series A Low Level Shutoff Kit Part No. 918396, Series A Low Level Shutoff Kit Part No. 241652, Series A...
D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor. D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
Page 3
WARNINGS MOVING PARTS HAZARD Moving parts, such as the ram follower plate/pump inlet can pinch fingers. D Do not operate the equipment with the guard removed. D Keep clear of all moving parts when starting or operating the equipment. D Keep hands and fingers away from the priming piston during operation and whenever the pump is charged with air.
Low Level Shutoff Kit Setup Install the low level shutoff as shown in the parts NOTE: Always use Genuine Graco Parts and Acces- drawing for your model (see pages 5–7). See also sories, available from your Graco distributor. If you Fig.
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.