Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
R
GIB C
EPLACING
Parts and Tools
Parts List
Kit should includes: 1 each of the following
1
440000902
2
440000907
3
440000908
4
440000909
5
440000910
6
440000919
7
440000920
8
440000921
9
440000922
Tools Required
One - Phillips Screw Driver
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
Wiring Diagram of GIB Control
If housing and plugs are damaged during disassembly please refer to the drawing below to for proper location of
inputs and outputs and wires. Each plug is keyed for proper placement.
Release Date: January 10, 2011
© 2003-2011, IMI Cornelius Inc.
Q
ONTROLLER ON
GIBC Field Kit –Quest (P/N 729011138)
Control Ice Bank 120/60 QST/SLJ/UN750/VG245/VNT
P- Housing Elect Plug A GIBC
P- Housing Elect Plug B GIBC
P- Housing Elect Plug C GIBC
P- Housing Elect Plug D GIBC
P- Cover "A"
P- Cover "B"
P- Cover "C"
P- Cover "D"
www.cornelius.com
Replacing GIB Controller on Quest Juice Dispensers
J
D
UEST
UICE
ISPENSERS
- 1 -
Revision: B
Publication Number: 729011138INS
Advertisement
Related Manuals for Cornelius 440000902
Summary of Contents for Cornelius 440000902
-
Page 1: Parts List
If housing and plugs are damaged during disassembly please refer to the drawing below to for proper location of inputs and outputs and wires. Each plug is keyed for proper placement. Release Date: January 10, 2011 © 2003-2011, IMI Cornelius Inc. Replacing GIB Controller on Quest Juice Dispensers UEST UICE GIBC Field Kit –Quest (P/N 729011138) - Page 2 5. To remove the side panels locate two screws at the rear of the panel top and bottom and pull off. 6. Locate the plastic wire tie holding the wire harness bundle together and cut to remove. Publication Number: 729011138INS - 2 - © 2003-2011, IMI Cornelius Inc.
- Page 3 If any part of the dispenser does not function properly such as pumps, disconnect power and reinstall GIB control. Be sure connector is seated prop- erly in connectors. © 2003-2011, IMI Cornelius Inc. Replacing GIB Controller on Quest Juice Dispensers - 3 -...