Cleaning; Troubleshooting; Cartridge Filter - Shop-Vac 9520210 User Manual

Foam Sleeve
Rinse with water, dry and reinstall.
Reusable Disc Filter
Rinse with water, dry and reinstall; do not
machine wash.
Troubleshooting Chart
Symptom
Parts/accessories missing
Vacuum cleaner will not start
Dust discharging from exhaust
Loss of suction
Static shock
SHOP-VAC
CLEANING REFERENCE
Full Polyester Filter
Brush off dirt and reinstall; if filter gets wet,
rinse with water, dry and reinstall.
Cartridge Filter &
®
Ultra Web Cartridge Filters
From inside of filter, rinse with water, dry com-
pletely and reinstall.
Possible Cause(s)
1. Packed in tank
1. No power at receptacle
2. Defective switch
3. Defective motor
1. Filter not installed/not installed properly
2. Filter damaged
3. Filter clogged or dust is too fine
4. Filter not functional
1. Loose hose connection
2. Filter clogged
3. Full tank
4. Hole in hose
1. Dry environment
2. Relative humidity of air is low
®
VACUUM FILTER
Super Performance Filter
Dispose of after filter develops rips or tears.
All Collection Bags
Dispose of bag when full.
Cleanstream
Cartridge Filters
Clean installed filter by simply tapping or
shaking the vacuum unit. To restore optimum
airflow, remove filter, tap end cap against
a hard surface to loosen debris. Additional
debris can be removed by rinsing outside
surface of filter with running water. Avoid
dampening inside of filter. Completely air dry
filter after washing.
Corrective Action
1. Check in tank
1. Check for power
2. Replace switch
3. Replace motor
1. Properly install filter
2. Replace filter
3. Use more efficient filter
4. Clean and replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if practical, use a console
or installed humidifier).
2. This situation is temporary and does not
affect the use of the vacuum cleaner.
®