Installation Manual; Specification - Cornelius FlavorFusion Series Installation Manual

With cold carbonation

Hide thumbs

Table Of Contents

Table of Contents

FlavorFusion Installation Manual

FlavorFusion with Cold Carbonation

ESCRIPTION

The FlavorFusion series of dispensers solves your ice and beverage service needs in a sanitary, space saving,

economical way. Designed to be manually filled with ice from any remote ice–making source, these dispensers will

dispense cubes (up to 1–1/4 inch in size), cubelets, and compressed (not flaked) ice. In addition, the units include

beverage faucets, a cold plate, an internal carbonator tank and an external pump for the carbonator, and are

designed to be supplied direct from syrup tanks with no additional cooling required..

CAUTION:

Dispenser cannot be used with crushed or flaked ice. Use of bagged ice which has frozen into large chunks can void

warranty. The dispenser agitator is not designed to be an ice crusher. Use of large chunks of ice which "jam up" inside

the hopper will cause failure of the agitator motor and damage to the hopper. If bagged ice is used, it must be carefully

and completely broken into small, cube-sized pieces and left to "temper" or warm up for a minimum of 20 minutes in

room temperature before loading into the dispenser hopper.

PECIFICATION

Model Descriptions:

Ice Storage:

Maximum Number of Faucets Available:

Built–in Cold Plate:

Electrical:

Dimensions:

Operating Pressure

Publication Number: 621057601INS