Quick Instructions - Sanyo DAS201 Owner's Instruction Manual

QUICK INSTRUCTIONS

• Setting the Time
– Press 'STOP/TIME' to enter the setting mode
– Then Press the FF Key or the REPT
– Press 'STOP/TIME' again to set the Weekday
– Repeat to set Hours and Minutes
• Playing the Current Time
– Press 'STOP/TlME'
• Recording the Outgoing Message (OGM)
– Press 'OGM1'
– Speak clearly into the microphone with your message
– Press 'STOP/TIME' to stop recording
– Repeat the process for 'OGM2'
• Recording a Memo
– Press 'MEMO/2WAY' for 2 seconds
– Speak clearly into the microphone with your message
– Press 'STOP/TIME' to stop recording
• 2 Way Recording
– Press 'MEMO/2WAY' for 4 seconds
– Speak into your telephone in a normal fashion
– Press 'STOP/TIME' to stop recording
• Playing a Memo
– Press 'MEMO/2WAY'
• Setting to Answer/Record Mode or Answer Only Mode
– If system is in Answer Only Mode, Press 'ANSWER' for about 2 seconds.
– The DAS 201 will beep and OGM1 will play.
– Repeat the process to return the system to ANSWER ONLY MODE.
– The DAS 201 will beep and OGM2 will play
• Playing Messages
1. Playback
2. Pause Message
3. Resume Playback from Pause
Key to adjust the Weekday
Press 'PLAY'
Press 'PLAY'
Any one of the following keys will
resume Playback: PLAY/FF
REPT /ERASE/STOP
2
4. Repeat Message
5. Resume Playback from Pause
6. Erase Single Message
7. Stop Playback
8. Erase and Save ALL Messages
• Security Code Remote Control
– Refer to "Remote Control Functions Table" on Page 11/12.
/
QUICK INSTRUCTIONS CONT'D
Press 'REPT
current message, twice to replay
the previous message
Any one of the following keys will
resume Playback: PLAY/FF
REPT
Press 'ERASE'
Press 'STOP/TIME'
Press and Hold 'ERASE' to erase
ALL Messages
To restore or save all messages,
Press and Hold 'ERASE' again.
3
' once to replay
/
/ERASE/STOP