Copying A Drum Kit - Boss Dr. Rhythm DR-770 Owner's Manual

Chapter 8. Creating an Original Drum Kit

Copying a Drum Kit

You can copy a drum kit to another user drum kit (numbers
65–128).
The following settings will be copied.
Reverb/Flanger
Reverb Level, Flanger Level
Reverb Send Level, Flanger Send Level
Instrument settings
Instrument Assign, Level, Pitch, Decay, Nuance, Pan, Assign
Type, Sensitivity Curve
Effect settings
Reverb Type, Reverb Time, Reverb Low Pass Filter, Delay
Feedback, Flanger Type, Flanger Depth, Flanger Rate,
Flanger Feedback, Flanger Delay, Equalizer High Gain,
Equalizer Low Gain
Pad Bank Layer
Note Number Assign (P.87)
Drum Kit Name
1. Press [DRUM KIT] to make "DRUM KIT" blink.
2. Use [VALUE*] to select the copy source drum kit.
3. Press [COPY]. (The display will indicate "COPY.")
4. Use [VALUE*] to select the copy destination user drum
kit.
fig.108-38a
MODE FUNC PAD BANK
SONG REAL INSERT
TEMPO DPP
PATTERN STEP COPY
PAD EFFECTS DELETE
DRUM KIT
UTILITY MIDI
REVERB IND
QUANTIZE BEAT
NEXT PTN LENGTH FLANGER
PATTERN
PART
PATTERN
SONG
PAD NUMBER
Source Drum Kit Destination Drum Kit
(number / name)
NOTE
It is not possible to select a preset drum kit (numbers 1–64).
84
A B
5. Press [ENTER].
The display will ask "Sure?," allowing you to confirm
whether you want to copy the data.
fig.108-39a
MODE FUNC
SONG REAL INSERT
PATTERN STEP COPY
PAD EFFECTS DELETE
UTILITY MIDI
QUANTIZE BEAT
LENGTH
NEXT PTN
PART PATTERN
6. To copy the data, press [ENTER].
The drum kit will be copied, and the display will
indicate "Done."
To cancel the operation, press [STOP/EXIT].
The drum kit copy operation will be canceled, and the
display will indicate "Aborted."
If you have selected an ambience type by pressing
[AMBIENCE] when a preset drum kit is being selected:
Taking steps 3–6 will copy both setting of the preset drum kit
and the setting of the ambience selected right before [COPY]
was pressed into the user drum kit.