Adjusting The Equalizer Settings; Adjusting The Reverb/Flanger Depth - Boss Dr. Rhythm DR-770 Owner's Manual

Chapter 8. Creating an Original Drum Kit

Adjusting the Equalizer Settings

Here's how you can select and modify settings (parameters)
for the equalizer.
1. After selecting a drum kit, press [EFFECTS] so the
display indicates "EFFECTS."
The DR-770 is now in Effects mode.
2. Use [
] [ ] to select the parameter that you want to
modify.
EQ HIGH (equalizer high gain)
Range: -12–±0– +12 dB
fig.108-30a
MODE FUNC
SONG REAL INSERT
PATTERN STEP COPY
PAD EFFECTS DELETE
UTILITY MIDI
QUANTIZE BEAT
NEXT PTN LENGTH
PART PATTERN
EQ LOW (equalizer low gain)
Range: -12–±0– +12 dB
fig.108-31a
MODE FUNC
SONG REAL INSERT
PATTERN STEP COPY
PAD EFFECTS DELETE
UTILITY MIDI
QUANTIZE BEAT
NEXT PTN LENGTH
PART PATTERN
3. Use [DEC] [INC] or [VALUE] to adjust the value.
Functions of Each Parameter
EQ HIGH (equalizer high gain)
This adjusts the level (volume) of the high-frequency range
in 2 dB steps. A setting of ±0 dB is the original level, negative
(-) settings will decrease the level, and positive (+) settings
will increase the level.
EQ LOW (equalizer low gain)
This adjusts the level (volume) of the low-frequency range in
2 dB steps. A setting of ±0 dB is the original level, negative (-)
settings will decrease the level, and positive (+) settings will
increase the level.
NOTE
You may hear a noise when the value of the equalizer is being
changed (when an ambience or drum kit is changed to a different
one).
80
Adjusting the Reverb/
Flanger Depth
The depth of the reverb and flanger can be adjusted both for
the entire drum kit and for each individual instrument.
Drum kits and instruments are connected to the reverb/
flanger effects as shown in the following .
fig.108-32a
Sound Generator
Reverb Flanger
Send Level Send Level
Reverb Flanger
Reverb Level Flanger Level
To adjust the overall reverb/flanger depth for the entire
drum kit, adjust the Reverb Level or Flanger Level.
To adjust the reverb/flanger depth for an individual
instrument, adjust the level of the signal that is sent to
the reverb/flanger (Send Level).
NOTE
You cannot, however, adjust the depth of the equalizer for an
individual instrument.
Equalizer
L R
OUTPUT INDIVIDUAL