Selecting How Pad Striking Force Will Affect The Sound (Sensitivity Curve) - Boss Dr. Rhythm DR-770 Owner's Manual

Chapter 8. Creating an Original Drum Kit
MONO EXC
The instrument will not sound simultaneously with any
other instrument that is assigned to the same EXC number.
Nor will repeated strikes on the instrument be layered. This
is effective on instruments such as Guiro Short or Guiro
Long, where it is normally impossible for the two
performance techniques to be heard simultaneously.
fig.108-16a
Level
Not mixed
Level
EXC1
EXC1
Not mixed
If a pad number 33(-01)–55(-23) is selected, you can
press [ENTER] to play the instrument.
6. Repeat steps 3–5 as many times as necessary.
7. To end the procedure after modifying the assign type
for instruments of pad numbers 33 (-01)–55 (-23), press
[STOP/EXIT].
76
Time
EXC2
Time
Mixed
Selecting How Pad Striking Force Will
Affect the Sound (Sensitivity Curve)
For each pad bank A and B, you can select a response curve
(Sensitivity Curve) that will determine how volume, tone,
etc., will change in response to the force with which you
strike the pads.
NOTE
It is not possible to set the Sensitivity Curve independently for each
pad.
1. After selecting a drum kit, press [PAD] so the display
indicates "PAD."
The DR-770 is now in Pad mode.
2. Use [
] [ ] to select "8 CRV."
fig.108-17a
MODE FUNC PAD BANK
SONG REAL INSERT
TEMPO DPP
PATTERN STEP COPY
PAD EFFECTS DELETE DRUM KIT
UTILITY MIDI
REVERB IND
QUANTIZE BEAT
NEXT PTN LENGTH FLANGER
PART PATTERN
PATTERN
SONG
PAD NUMBER
3. Press [PAD BANK] to select the desired pad bank.
NOTE
If the pad banks are layered, the display will flash the word
"LAYER." In this state it is not possible to set the sensitivity
curve.
4. Use [DEC] [INC] or [VALUE] to select the Sensitivity
Curve.
Range: EXP1, LIN1, EXP2, LIN2, XFDO, XFDI, FIX1,
FIX2
fig.108-18a
Level
EXP1
LIN1
EXP2
Strength
If XFDI or XFDO are selected, you can use pad bank layering
to produce a feeling of natural dynamics.
5. Repeat steps 3–4 as many times as necessary.
A B B
Level
FIX1
31
LIN2
XFDI
Velocity
FIX2
=15
XFDO
Strength