Setting The Stereo Location (Pan) - Boss Dr. Rhythm DR-770 Owner's Manual

Chapter 8. Creating an Original Drum Kit
Instrument marked by *
±0: Original nuance
+ values: Increasing the value will boost the low-
frequency components. (simulated strike
toward the center.)
- values: Increasing the value will diminish the low-
frequency components. (simulated strike
toward the edge.)
fig.108-08a
Instrument marked by ** (hi-hat, ride cymbal, etc.)
±0: Original nuance
+ values: Increasing the value will move the simulated
strike toward the center.
- values: Increasing the value will move the simulated
strike toward the edge.
fig.108-09a
If a pad number 33 (-01)–55 (-23) is selected, you can
press [ENTER] to play the instrument.
6. Repeat steps 3–5 as many times as necessary.
7. To end the procedure after modifying the Nuance for
instruments of pad numbers 33 (-01)–55 (-23), press
[STOP/EXIT].
74
Setting the Stereo Location
(Pan)
For each instrument of a drum kit, you can select a location
within the stereo sound field (pan) from among 15 available
positions.
1. After selecting a drum kit, press [PAD] so the display
indicates "PAD."
The DR-770 is now in Pad mode.
2. Use [
] [ ] to select "6 PAN."
fig.108-10a
MODE FUNC PAD BANK
SONG REAL INSERT
TEMPO DPP
PATTERN STEP COPY
PAD EFFECTS DELETE
DRUM KIT
UTILITY MIDI
REVERB IND
QUANTIZE BEAT
NEXT PTN LENGTH FLANGER
PART PATTERN
PATTERN
SONG
PAD NUMBER
3. Press [PAD BANK] to select the desired pad bank.
NOTE
If the pad banks are layered, the display will blink "LAYER." In
this state it is not possible to set the pan.
4. Press the pad for the instrument whose pan you want to
set.
If you wish to set the pan for the instruments of pad
numbers 33 (-01)–55 (-23), use the following procedure
to select the pad number.
1) Press [ENTER].
2) Use [ ] [ ] to select the pad number.
When you wish to resume using the pads to select
instruments, press [STOP/EXIT].
5. Use [DEC] [INC] or [VALUE] to set the pan.
Range: L7–C–R7, INDIV
If "INDIV" is selected, the sound will not be output from
OUTPUT L/R and the PHONES jack.
fig.108-11a
L7 L1
NOTE
The pan setting (except when "INDIV") of Instrument marked
with *** in the "Instrument List" (p. 96) will be ignored.
A B B
C
R1 R7