1-Bin Shift Sort Tray Type 2600 - Ricoh AP600N Setup Manual

1-bin Shift Sort Tray Type 2600

Important
❒ If you attach the 1-bin Shift Sort
Tray and the Paper Feed Unit, the
Paper Feed Unit must be attached
prior to attaching the 1-bin Shift
Sort Tray.
❒ The 1-bin Shift Sort Tray and the
Mailbox cannot be attached to the
printer at the same time.
❒ Check the printer nameplate to
confirm the model code.
A A A A
Check the contents of the box for
the following items:
• 1-bin Shift Sort Tray
• Upper Tray
• Installation Guide
B B B B
Confirm that the followings are
true:
• The power switch is turned off.
• The interface cable is un-
plugged from the printer.
C C C C
Remove the adhesive tapes and
the packing material.
D D D D
Remove the upper cover of the
printer.
Note
❒ The upper cover that is re-
moved, is not used when in-
stalling the 1-bin Shift Sort Tray.
E E E E
Holding the 1-bin Shift Sort Tray
on both sides, align the catches
with the holes on the printer and
insert.
R CAUTION:
• When lifting the 1-bin Shift Sort
Tray, hold it on both sides. Hold-
ing underneath the 1-bin Shift
Sort Tray may cause injury to the
hands if caught between the 1-
bin Shift Sort Tray and the print-
er.
ZKGX300E
1-bin Shift Sort Tray Type 2600
ZKGH170E
ZKGX170E
2
45