Raymarine Raydata Installation And Operating Handbook page 5

ii
Recommended Use
When you first receive your RayData, you should read Chapters 1 and 2,
and install the equipment. Then read Chapter 3, and familiarise yourself
with the basic operation of the RayData. You may wish to refer to the
RayData Quick Reference Card and to Chapter 6 for more details about
some displays.
When you are happy using the RayData, read Chapters 4 and 5, decide
how you wish to set up your defaults and alarms, and follow the
instructions in those chapters to make your changes. Chapter 4 also
explains how to calibrate the speed so that you obtain an accurate
reading for your vessel.
If you experience any difficulties with your RayData, refer to Chapter 7.
Conventions
Throughout this handbook, the keys are shown in bold capitals: for
example, SPEED.
Terms in bold type are included in the glossary.
Warranty
To verify your RayData ownership, please take a few minutes to fill out
the warranty registration card found at the end of this handbook. It is
very important that you complete the owner information and return the
card to the factory in order to receive full warranty benefits.
RAYDATA Installation and Operation Handbook